Rear Stabilizer Bar Repair Procedures

Replacement

1. 1
   Loosen the wheel nuts slightly. Raise the vehicle and make sure it is securely supported.
2. 2
   Remove the rear wheel and tire (A) from the rear hub.

   Tightening torque: 88.2 - 108 N·m

   

3. 3
   Loosen the nut and remove the rear stabilizer link (A) from the rear lower arm and stabilizer bar.

   Tightening torque: 98.1 ~ 118 N·m

   

4. 4
   Loosen the mounting bolt and remove the stabilizer bar (A) from the subframe.

   Tightening torque: 44.1 ~ 54 N·m

   

   

5. 5
   Install in the reverse order of removal.

Inspection

1. 1
   Check the rear stabilizer bar for deformation.
2. 2
   Check the ball joint of the rear stabilizer link for damage.