Kia Cee'd Quiz
Suspension System

Lower Arm Repair Procedures

In this manual: Suspension System
General Information — 15Maintenance — 7Engine Mechanical System — 84Engine Electrical System — 49Emission Control System — 22Fuel System — 95Clutch System — 28Manual Transmission — 21Dual Clutch Transmission (DCT) System — 47Drive Shaft and Axle — 20Suspension System — 36Steering — 23Restraints — 39Brake System — 54Body (Interior and Exterior) — 209Body Electrical System — 254Heating, Ventilation, and Air Conditioning — 56
5steps
~30min
2/5difficulty
04080120160200107.880N·mlb·ft
Tightening torque found on this page
Done 0 of 5

Replacement

  1. Loosen the wheel nuts slightly. Raise the vehicle and make sure it is securely supported.
  2. Remove the rear wheel and tire (A) from the rear hub.

    Tightening torque: 88.2 - 108 N·m

  3. Disconnect the parking brake cable. (Refer to Brake System - Rear Disc Brake)
  4. Loosen the bolts (B, C) and nut (D), then remove the rear trailing arm (A) from the rear axle. Tightening torque: (B) 98.1 ~ 118 N·m (C) 6.8 ~ 10.7 N·m (D) 44.1 ~ 54 N·m
  5. Install in the reverse order of removal.

Test yourself

A quick Kia Cee'd quiz: every answer comes with an explanation and a link to the manual page.