Body Electrical System

Intelligent Parking Assist System Sensor Repair Procedures

10steps
~60min
3/5difficulty
Done 0 of 10

Removal

SPAS front/rear sensor
  1. Remove the front bumper. (Refer to Body - "Front Bumper Cover")
  2. Pull out the SPAS sensor (A) by opening the sensor holder.
  3. Disconnect the connector from the sensor.
  4. Remove the front bumper. (Refer to Body - "Front Bumper Cover")
  5. Pull out the SPAS sensor (A) by opening the sensor holder.
  6. Disconnect the connector from the sensor.
SPAS side sensor

Installation

SPAS front/rear sensor
  1. Install the SPAS sensor and connector.
  2. Install the front/rear bumper.
  3. Install the SPAS sensor and connector.
  4. Install the front bumper.
SPAS side sensor

Test yourself

A quick Kia Cee'd quiz: every answer comes with an explanation and a link to the manual page.