Kia Cee'd Quiz
Body Electrical System

Intelligent Parking Assist System Control Unit Repair Procedures

In this manual: Body Electrical System
General Information — 15Maintenance — 7Engine Mechanical System — 84Engine Electrical System — 49Emission Control System — 22Fuel System — 95Clutch System — 28Manual Transmission — 21Dual Clutch Transmission (DCT) System — 47Drive Shaft and Axle — 20Suspension System — 36Steering — 23Restraints — 39Brake System — 54Body (Interior and Exterior) — 209Body Electrical System — 254Heating, Ventilation, and Air Conditioning — 56
10steps
~60min
3/5difficulty
Done 0 of 10

Removal

  1. Remove the glove box housing. (Refer to Body - "Glove Box Housing")
  2. Remove the SPAS unit (A) after removing the nut and disconnecting the connector.

Installation

  1. Connect the connectors and install the SPAS control unit (A).
  2. Install the glove box housing.

Inspection

  1. The SPAS (Intelligent Parking Assist System) can be diagnosed quickly using GDS. SPAS communicates with GDS, then reads input/output values and operates the actuator.
  2. To diagnose the SPAS (Intelligent Parking Assist System) function, select the model menu and SPAS.
  3. To view the SPAS input/output current value, select "Current DATA". This provides information on the SPAS input/output conditions.
  4. To perform a forced operation on the SPAS input factors, select "ON TEST".
  5. To check the DTC of each module, select "Diagnostic Trouble Codes".
  6. After replacing the SPAS unit, perform the "SPAS Option Coding" procedure with GDS.

Test yourself

A quick Kia Cee'd quiz: every answer comes with an explanation and a link to the manual page.