Transaxle Oil Repair Procedures

Inspection

1. 1
   Park the vehicle on a level surface and turn off the engine.
2. 2
   Remove the fill plug (A) and check the fluid condition and level.

   

3. 3
   If the fluid is dirty, loosen the drain plug (B) and drain the fluid. Then fill with new fluid.

   

Replacement

1. 1
   Remove the drain plug (A) and drain all the fluid. Then replace the drain plug. Tightening torque of the drain plug: 58.8 ~ 78 N·m

   

2. 2
   Remove the fill plug (A) and fill approximately 1.9 liters of new fluid. Then reinstall the removed fill plug.