Suspension System
Wheel
In this manual: Suspension System
3steps
~18min
2/5difficulty
Done 0 of 3
Repair Procedures
Hub Nut Tightening Sequence
Tighten the hub nuts as follows.Tightening torque: 107.9–128 N·m


- Raise the vehicle.
- Measure wheel runout with a dial indicator as shown in the illustration below.
Run out Aluminum Radial mm (in) Below 0.3 (0.0118) Lateral mm (in) Below 0.3 (0.0118) - If the measured value exceeds the specified value, replace the wheel.

Test yourself
A quick Kia Picanto JA quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?