Mazda 6 Quiz
Heater and air conditioner systems

Refrigerant pressure switch removal/installation

In this manual: Heater and air conditioner systems
General information — 42Engine — 23Lubrication system — 10Cooling system — 9Fuel and emission control systems — 161Engine electrical system — 17Clutch — 21Manual transaxle — 10Automatic transaxle — 110Front and rear axles — 20Steering system — 15Braking system — 104Suspension — 34Body — 201Body electrical system — 287Heater and air conditioner systems — 89Technical data — 1Special tools — 1
~1min read

1. Remove the battery.

2. Discharge the refrigerant from the system. (See RECOVERY.) (See CHARGING.)

3. Loosen the refrigerant pressure switch using two spanners.

4. Remove in the order indicated in the table.



5. Install in the reverse order of removal.

Refrigerant Pressure Switch Installation Note

Apply compressor oil to O-ring and connect the joint.

Test yourself

A quick Mazda 6 quiz: every answer comes with an explanation and a link to the manual page.