Heater and air conditioner systems
Solar radiation sensor inspection
In this manual: Heater and air conditioner systems
~1min read
1. Shine an incandescent light (60 W) on the solar radiation sensor from a distance of approximately 100 mm {3.94 in}.

2. Connect positive (+) lead to terminal A and negative (−) lead to terminal B of the solar radiation sensor.

- If the output voltage is not above 0.45 V
, replace the solar radiation sensor.
Test yourself
A quick Mazda 6 quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?