Combination switch

1. 1
   High beam
2. 2
   Right turn signals
3. 3
   Headlamp flasher
4. 4
   Left turn signals

• Short flash: briefly move the combination switch in the direction of arrow 2 or arrow 4 up to the pressure point.

The corresponding turn signals flash 3 times.

• Continuous flashing: move the combination switch in the direction of arrow 2 or arrow 4 beyond the pressure point.

High beam

• High beam activation: turn the key to position 2 in the ignition switch or start the engine.
• Turn the light switch toor to.
• Move the combination switch in the direction of arrow 1 beyond the pressure point.

In position, the high beams only come on in darkness and when the engine is running.

When the high beams are on, thein the instrument cluster lights up.

• High beam deactivation: pull the combination switch back to its original position.

Theindicator lamp in the instrument cluster goes out.

Headlamp flasher

• Activation: turn the key to position 1 or 2 in the ignition switch or start the engine.
• Move the combination switch in the direction of arrow 3.