Light switch

Operation

Example

1. 1
   Left parking lamps
2. 2
   Right parking lamps
3. 3
   Position lamps, license plate lamp and instrument cluster lighting
4. 4
   Position lamps, license plate lamp and instrument cluster lighting
5. 5
   Low beams/high beams
6. 6
   Rear fog lamp
7. 7
   Fog lamps [1]

You can switch the turn signals and high beams on and off, and flash the headlamps, using the turn signal lever.

If the battery discharges heavily, the position lamps and parking lamps switch off automatically to ensure the engine can be started next time. Always park the vehicle in a safe, sufficiently lit place in accordance with legal requirements. Avoid using the position lampsfor several hours. If possible, switch on the right or left parking lampsor left.

The exterior lighting (except for the position lamps/parking lamps) switches off automatically when

• you remove the key from the ignition switch
• you open the driver's door while the key is in position 0 in the ignition switch

If you hear a warning signal when leaving the vehicle, the lighting may still be switched on.

• Turn the light switch to.

Low beam

• Low beams on: turn the key to position 2 in the ignition switch or start the engine.
• Turn the light switch to.

Thein the instrument cluster lights up.

Daytime running lights

You can switch the function on or off