Suspension

Additional Service When Replacing Air Suspension Control Module

3steps
~18min
2/5difficulty
Done 0 of 3

Work Procedure

Description

Vehicle specification needs to be written with CONSULT because it is not written after replacing the air suspension contorol module.

For details the operation, refer to “CONSULT Operation Manual”.

Work Procedure

WRITING VEHICLE SPECIFICATION AND VIN

With CONSULT

Perform writing vehicle specification to air suspension control module according to "Replace ECU" in CONSULT Operation Manual.

>>

GO TO 2.

PERFORM NECESSARY WORK

With CONSULT

  1. Select "Air suspension" and perform "Work support" in the following order. Refer to Work Support.

    1. Venting valve operation check

    2. Air filling/pressure measurement

    3. Height sensor calibration

    4. vehicle height adjustment

  2. Perform self-diagnosis for “All self diagnosis result”.

  3. Erase the memory of self-diagnosis results.

>>

WORK END