Body Interior

Additional Service When Replacing Driver Seat Control Unit

~1min read

Description

Each function is reset to the following condition when the driver seat control unit is replaced. For details, refer to Work Procedure.

FunctionConditionProcedure
Memory (Seat, steering column, door mirror) Erased Perform memory storing
Log-in Erased Perform log-in storing

Work Procedure

REPLACE DRIVER SEAT CONTROL UNIT

Replace driver seat control unit. Refer to Removal and Installation.

>>

GO TO 2.

vehicle SPECIFICATION RECOGNITION

Connect battery negative terminal. Power switch ON and wait for 30 seconds or more.

>>

GO TO 3.

LOG-IN STORING

Perform log-in storing. Refer to System Description.

>>

GO TO 4.

MEMORY STORING

Perform memory storing. Refer to Description.

>>

WORK END