Body Interior
Additional Service When Replacing Steering Column Control Module
In this manual: Body Interior
~1min read
Description
Each function is reset to the following condition when the steering column control module is replaced. For details, refer to Work Procedure.
| Function | Condition | Procedure |
|---|---|---|
| Memory (Steering column) | Erased | Perform memory storing |
Work Procedure
REPLACE STEERING COLUMN CONTROL MODULE
Replace steering column control module. Refer to Removal and Installation.
>>GO TO 2.
PERFORM THE STEERING COLUMN POSITION LEARNING
Perform the steering column position learning. Refer to Description.
>>GO TO 3.
MEMORY STORING
Perform memory storing. Refer to Description.
>>WORK END
Was this page helpful?