Body Interior

System Setting

5steps
~30min
2/5difficulty
Done 0 of 5

Description

The settings of the automatic driving positioner system can be changed, using information display in the combination meter and the set switch. Always check the settings before and after replacing driver seat control unit. For details, refer to Work Procedure.

×: Applicable

Setting Change
ItemContentInformation displaySet switchFactory setting
Exit assist (seat)

Exit assist (seat) can be selected:

ON (operated) – OFF (not operated)
x x ON
Exit assist (steering column)

Exit assist (steering column) can be selected:

ON (operated) – OFF (not operated)

Work Procedure

CHOOSE METHOD

There are two ways of setting method.

Which method do you choose?

With information display>>

GO TO 2.

With set switch>>

GO TO 3.

WITH INFORMATION DISPLAY

  1. Ignition switch ON.

  2. Select "Driving Position" of “vehicle Settings” of "Settings" of information display.

  3. Select "Exit Seat Slide" or "Exit Steering" to change between ON and OFF.

>>

GO TO 4.

WITH SET SWITCH

  1. Ignition switch OFF.

  2. Push setting button and hold for more than 10 seconds.

>>

GO TO 4.

CONFIRM THE OPERATION

Check the exit assist function setting is changed.

>>

WORK END