Body Interior

Memory Storing

4steps
~24min
2/5difficulty
Done 0 of 4

Description

Always perform the memory storage when the driver seat control unit or steering column control module is replaced. The memory function will not operate normally if no memory storage is performed. For details, refer to Work Procedure.

Work Procedure

Memory Storage Procedure

Two positions for the seat, steering column, and door mirror can be stored for memory operation by following procedure.

REGISTRATION METHOD

  1. Adjust seat, steering column, and door mirror position manually.

  2. Push set switch.

  3. Push the memory switch (1 or 2) for at least 1 second within 5 seconds after pushing the set switch.

  4. Confirm the operation of each part with memory operation.

>>

WORK END