Transmission & Driveline

Air Breather

~2min read

Exploded View

Clip A Air breather tube Clip B
Air breather hose A Clip C Clip D
Hose connector Air breather hose B Bracket
Clip E Hose clamp Air breather
Rear final drive assembly
: vehicle front
: N·m (kg-m, in-lb)
: Always replace after every disassembly.

Removal and Installation

REMOVAL

Remove the hose clamp and separate air breather hose B from air breather .

Remove clip E from bracket .

Remove bracket mounting bolt () and remove bracket .

Remove clip D from body frame .

Remove clip C from body frame .

Remove air breather hose A from air breather tube .

Remove air breather hose assembly.

Remove clip B from bracket .

Remove clip A from bracket and remove air breather tube.

Separate each component part.

INSTALLATION

Note the following, and install in the reverse order of removal.

  • For non-reusable parts, refer to Exploded View.

  • When inserting air breather hose A to air breather tube, align the paint mark of air breather hose A with the paint mark of breather tube.

  • When inserting air breather hose to hose connector , be sure to insert it fully until its end reaches the stop.

  • When installing air breather to final drive assembly, Install air breather so that the paint mark on it faced forward of the vehicle.

    : vehicle front
  • When inserting air breather hose B into the air breather, align paint mark on air breather hose B and tab on the hose clamp with the paint mark on the air breather.