Electrical & Power Control
Alternator. Vr35ddtt
In this manual: Electrical & Power Control
~2min read
Vr35ddtt
Exploded View

| Engine assembly | Alternator | “B” terminal harness | |||
| Alternator harness connector | |||||
| : vehicle front | |||||
| : N·m (kg-m, ft-lb) | |||||
Removal and Installation
REMOVAL
Disconnect battery cable from negative terminal. Refer to Removal and Installation.
Remove drive belt. Refer to Removal & Installation.
Remove inlet air duct 2. Refer to Removal and Installation.
Disconnect alternator harness connector
.

| : vehicle front |
Remove “B” terminal harness mounting nut
, and then disconnect “B” terminal harness
.

| : vehicle front |
Remove alternator mounting bolts
.

| : vehicle front |
Remove alternator from vehicle.
INSTALLATION
Note the following items, and then install in the reverse order of removal.
Was this page helpful?