Electrical & Power Control
Cumulative Battery Discharge Current Clear
In this manual: Electrical & Power Control
3steps
~18min
2/5difficulty
Done 0 of 3
Description
CUMULATIVE BATTERY DISCHARGE CURRENT CLEAR is an operation to clear the cumulative value of battery discharge current which is memorized in IPDM E/R. This operation is necessary after replaced the 12V battery. Refer to Work Procedure.
If the cumulative value is not erased when replacing the battery, the accurate diagnoses cannot be made because it was added to the cumulative value before the battery replacement.
Work Procedure
CLEAR CUMULATIVE BATTERY DISCHARGE CURRENT VALUE
With CONSULT
Ignition switch ON.
Select “Cumulative battery discharge current clear” in “Work support” mode of “IPDM E/R” using CONSULT.
Touch “START” to clear the cumulative value of battery discharge current.
WORK END
Was this page helpful?