Electrical & Power Control
Ipdm E/r
In this manual: Electrical & Power Control
~1min read
Exploded View

| IPDM E/R cover A | IPDM E/R | IPDM E/R cover B | |||
| IPDM E/R cover C | IPDM E/R cover D | IPDM E/R cover E | |||
| IPDM E/R cover bracket | |||||
| : Pawl |
Removal and Installation
REMOVAL
Disconnect the battery cable from the negative terminal.
Disengage the fixing pawl on the vehicle front side of the IPDM E/R cover A and then pull up IPDM E/R cover A.

| : Pawl |
Disengage the fixing pawls on the vehicle rear side of the IPDM E/R cover A and then remove IPDM E/R cover A.

| : Pawl |
Disengage the fixing pawls and then pull up IPDM E/R.

| : Pawl |
Disconnect the IPDM E/R harness connector and then remove IPDM E/R from the vehicle.
INSTALLATION
Install in the reverse order of removal.
Was this page helpful?