Brakes

Diagnosis and Repair Work Flow

18steps
~108min
5/5difficulty
Done 0 of 18

Work Flow

DETAILS OF TROUBLE DIAGNOSIS FLOWCHART

COLLECT THE INFORMATION FROM THE CUSTOMER

It is also important to clarify customer concerns before starting the inspection. First of all, perform an interview utilizing diagnostic work sheet and reproduce the symptom as well as fully understand it. Depending on the situations, drive the vehicle with the customer and check the symptom. Refer to Diagnostic Work Sheet.

>>

GO TO 2.

CHECK SYMPTOM

Reproduce the symptom that is indicated by the customer, based on the information from the customer obtained by the interview. Also check that the symptom is not caused by fail-safe mode. Refer to Fail-safe.

>>

GO TO 3.

PERFORM SELF-DIAGNOSIS (1)

With CONSULT

Perform self-diagnosis.

Is DTC detected?

YES>>

Record or print self-diagnosis results and freeze frame data (FFD). GO TO 4.

NO>>

GO TO 7.

PERFORM SELF-DIAGNOSIS (2)

With CONSULT

  1. Ignition switch OFF to ON without depressing the brake pedal.

  2. Ignition switch OFF and disconnect CONSULT from data link connector.

  3. Get out of the vehicle, close all doors (other than hood assembly), check that the combination meter is OFF, and wait for 1 minute or more without opening these doors.

  4. Ignition switch ON without depressing the brake pedal.

  5. Erase self-diagnosis result of “BRAKE”.

  6. Ignition switch OFF and disconnect CONSULT from data link connector.

  7. Get out of the vehicle, close all doors (other than hood assembly), check that the combination meter is OFF, and wait for 1 minute or more without opening these doors.

  8. Ignition switch ON without depressing the brake pedal.

  9. Perform self-diagnosis for “BRAKE”.

Is DTC detected?

YES>>

Record or print self-diagnosis results. GO TO 5.

NO>>

GO TO 7.

RECHECK SYMPTOM

With CONSULT

  1. Erase self-diagnosis results from the memory.

  2. Ignition switch OFF and disconnect CONSULT from data link connector.

  3. Get out of the vehicle, close all doors (other than hood assembly), check that the combination meter is OFF, and wait for 1 minute or more without opening these doors.

  4. Perform DTC reproduction procedures for the system that is malfunctioning.

Is DTC detected?

YES>>

GO TO 6.

NO>>

Check harness and connectors based on the information obtained by the interview. Refer to Intermittent Incident.

REPAIR OR REPLACE ERROR-DETECTED PART

  1. Repair or replace the part that is malfunctioning. Reconnect part or connector after repairing or replacing. Erase DTC from the memory when DTC is detected.

  2. Ignition switch OFF and disconnect CONSULT from data link connector.

  3. Get out of the vehicle, close all doors (other than hood assembly), check that the combination meter is OFF, and wait for 1 minute or more without opening these doors.

>>

GO TO 7.

IDENTIFY ERROR-DETECTED SYSTEM BY SYMPTOM DIAGNOSIS

Estimate which system is malfunctioning according to the possible symptoms based on symptom diagnosis and perform check.

Can the malfunctioning part be identified?

YES>>

GO TO 8.

NO>>

Check harness and connectors based on the information obtained by the interview. Refer to Intermittent Incident.

FINAL CHECK

With CONSULT

  1. Check the reference value for “BRAKE”. Refer to Values On The Diagnosis Tool.

  2. Perform the operation check. Check that the symptom is not reproduced under the same conditions as when the symptom is reproduced before.

Is the symptom reproduced?

YES>>

GO TO 3.

NO>>

INSPECTION END

Diagnostic Work Sheet

Description

  • In some cases, multiple conditions that appear simultaneously may cause a DTC to be detected.

INTERVIEW SHEET SAMPLE

Interview sheet
Customer nameMR/MSRegistration numberInitial year registration
vehicle typeVIN
Storage dateTraction motorMileagekm ( Mile)
Symptom □ Does not operate ( ) function
□ Warning lamp for ( ) turns ON.
□ Noise □ Vibration
□ Other( )
First occurrence □ Recently □ Other ( )
Frequency of occurrence □ Always □ Under a certain conditions of □ Sometimes ( time(s)/day)
Climate conditions □ Irrelevant
Weather □ Fine □ Cloud □ Rain □Snow □ Others ( )
Temperature □ Hot □Warm □ Cool □ Cold □ Temperature [Approx. °C ( °F)]
Relative humidity □ High □ Moderate □ Low
Road conditions

□ Urban area □ Suburb area □ Highway

□ Mountainous road (uphill or downhill) □ Rough road
Operating condition, etc.

□Irrelevant

□When traction motor starts □ During idling

□ During driving □ During acceleration □ At constant speed driving

□ During deceleration

□ During cornering (right curve or left curve)

□ When steering wheel is steered (to right or to left)
Other conditions
Memo