Brakes
Brake System Service Data and Specifications
In this manual: Brakes
~1min read
General Specifications
BRAKE SYSTEM
Unit: mm (in)
| Front brake | Cylinder bore diameter | 50.8 × 2 (2.000 × 2) | |
| Pad length × width × thickness | 151.6 × 53.2 × 12.0 (5.97 × 2.094 × 0.47) | ||
| Rotor outer diameter × thickness | 350.0 × 30.0 (13.78 × 1.18) | ||
| Rear brake | Cylinder bore diameter | 48.1 (1.894) | |
| Pad length × width × thickness | 120.1 × 40.9 × 10.0 (4.73 × 1.610 × 0.39) | ||
| Rotor outer diameter × thickness | 350.0 × 20.0 (13.78 × 0.79) | ||
Brake Pedal
Unit: mm (in)
| Item | Standard | |
|---|---|---|
| Brake pedal height | 157.9 – 167.9 (6.22 – 6.61) | |
Depressed brake pedal height [Depressing 490 N (50 kg, 110 lb) while engine ON] |
145.0 (5.71) or more | |
| Clearance between stop lamp switch mounting bracket and the brake pedal lever | 14.0 – 18.0 (0.55 – 0.71) | |
| Brake pedal play | 2 - 6 (0.08 - 0.24) | |
Front Disc Brake
Unit: mm (in)
| Item | Limit | |
|---|---|---|
| Brake pad | Wear thickness | 2.0 (0.079) |
| Disc rotor | Wear thickness | 27.4 (1.079) |
| Thickness variation (measured at 8 positions)* | 0.006 (0.0002) | |
| Runout (with it attached to the vehicle) | 0.035 (0.0014) | |
*To check if rotor imbalance, rotor runout or rotor deformation is occurred.
Rear Disc Brake
Unit: mm (in)
| Item | Limit | |
|---|---|---|
| Brake pad | Wear thickness | 1.5 (0.059) |
| Disc rotor | Wear thickness | 18.5 (0.728) |
| Thickness variation (measured at 8 positions)* | 0.009 (0.0004) | |
| Runout (with it attached to the vehicle) | 0.07 (0.0028) | |
*To check if rotor imbalance, rotor runout or rotor deformation is occurred.
Electrical Brake Control Unit
Unit: mm (in)
| Item | Standard |
|---|---|
| Input rod length | 179.7 − 180.7 (7.07 − 7.11) |
Was this page helpful?