Transmission & Driveline

Input Oil Seal

~1min read

Exploded View

Transfer assembly Input oil seal
: vehicle front
: Always replace after every disassembly.
: Apply transfer fluid.

Removal and Installation

REMOVAL

Remove transfer assembly from vehicle. Refer to Removal and Installation.

Remove input oil seal.

INSTALLATION

Note the following, and install in the reverse order of removal.

  • Install input oil seal with a drift (A) (commercial service tool) within the dimension (L) shown as follows.

    L : 1.5 – 2.5 mm (0.059 – 0.098 in)