Transmission & Driveline
Transfer Fluid
In this manual: Transmission & Driveline
~2min read
Inspection
FLUID LEAKAGE
Check transfer surrounding area (oil seal, drain plug, and filler plug etc.) for fluid leakage.
FLUID LEVEL
Remove filler plug
. Then check that fluid is filled up from mounting hole for the filler plug.

Install filler plug on transfer and then tighten to the specified torque.
| Specified torque | : 38 N·m |
Draining
The ignition switch OFF.
Remove the drain plug
.

Drain transfer fluid.
Install drain plug to transfer and tighten to the specified torque.
| Specified torque | : 38 N·m |
Refilling
The ignition switch OFF.
Remove filler plug
. Fill up with new transfer fluid up to mounting hole for the filler plug.

| Recommended fluid and capacity: | Refer to Fluids and Lubricants. |
Leave the vehicle for 3 minutes, and check the fluid level again.
Install filler plug on transfer and tighten to the specified torque.
| Specified torque | : 38 N·m |
Was this page helpful?