Transmission & Driveline
Rear Axle Tools and Preparation
In this manual: Transmission & Driveline
~1min read
Special Service Tools
Tool number (TechMate No.) Tool name | Description | |
|---|---|---|
KV40104001 (NI-53385) Hub lock nut wrench a: 85 mm (3.35 in) b: 65 mm (2.56 in) |
![]() |
Removing and Installing wheel hub lock nut. |
KV40107300 (NI-51751) Boot band crimping tool |
![]() |
Installing boot band |
KV38108000 ( - ) Protector a: 47 mm (1.85 in) dia. b: 20 mm (0.79 in) |
![]() |
Installing drive shaft |
KV40107500 ( — ) Drive shaft attachment |
![]() |
Removing drive shaft |
KV40108700 ( — ) Lock nut crimp punch a: 5 mm (0.20 in) b: 7 mm (0.28 in) |
![]() |
Installing wheel hub lock nut |
KV40108800 (NI-52982) Lock nut chisel a: 44.5 mm (1.752 in) b: 10 mm (0.39 in) dia. c: 31 mm (1.22 in) d: 4.5 mm (0.177 in) e: 26 mm (1.02 in) f: 0.4 mm (0.016 in) g: 4 mm (0.16 in) h: 24 mm (0.94 in) |
![]() |
Removing wheel hub lock nut |
Commercial Service Tools
| Tool name | Description | |
|---|---|---|
| Ball joint remover | ![]() |
|
| Drive shaft puller | ![]() |
Removing drive shaft joint sub assembly |
| Sliding hammer | ![]() |
Removing drive shaft |
| Power tool | ![]() |
Loosening bolts and nuts |
Lubricant or/and Sealant
| Name | Description |
|---|---|
| Fill NISSAN Genuine grease or equivalent |
|
| Apply paste [service parts (440037S000)] |
|
Was this page helpful?









