Transmission & Driveline
Rear Wheel Hub and Housing
In this manual: Transmission & Driveline
~1min read
Inspection
MOUNTING INSPECTION
Check the mounting conditions (looseness, back lash) of each component and component conditions (wear, damage) are normal.
WHEEL BEARING INSPECTION
Move wheel hub and bearing assembly in the axial direction by hand. Check there is no looseness of wheel hub and bearing assembly.
Axial end play : Wheel Bearing Rotate wheel hub and bearing assembly, and check there is no unusual noise or other irregular conditions. If there is any of irregular conditions, replace wheel hub and bearing assembly.
Was this page helpful?