Washer Tank
Exploded View

| Washer tank assembly | Packing | Hoodledge assembly RH | |||
| Washer tank inlet | Washer tank cap | ||||
| : N·m (kg-m, in-lb) | |||||
Removal and Installation
REMOVAL
Fully open hood assembly.
Remove washer tank inlet fixing clip
, and then remove washer tank inlet and washer tank cap.

Remove fender protector RH. Refer to Removal and Installation.
Disconnect front washer tube A
from washer pump, washer pump tube
from connector, and washer pump harness connector
.

Disconnect washer level switch harness connector
.

Remove washer tank assembly mounting bolts.
Slide to release engaged point of washer tank assembly and hoodledge assembly RH, and then remove washer tank assembly according to the numerical order 1→2 indicated by arrows as shown in the figure.

Remove washer pump and packing from washer tank. Refer to Removal and Installation.
Remove washer level switch and packing from washer tank. Refer to Removal and Installation.
INSTALLATION
Note the following items, and then install in the reverse order of removal.