Engine Cooling System K9K
Cooling fan
In this manual: Engine Cooling System K9K
~1min read
Exploded View

1. Fan motorCooling fan 2. Fan shroud
3. Cooling fan
A. Reverse screw
: Vehicle front
: N·m (kg-m, in-lb)
Removal and Installation
REMOVAL
1. Drain engine coolant. Refer to CO-62, "Draining". 2. Disconnect radiator hose (lower) clip. 3. Remove battery. Refer to PG-124, "Exploded View" 4. Remove air duct (inlet). Refer to EM-280, "Exploded View". 5. Remove fusible link and relay box bracket, and put fusible link and relay box aside. 6. Remove reservoir tank. 7. Disconnect fan motor connector and boost pressure control valve harness connector, and put the connectors aside. 8. Remove boost pressure control valve assembly. Refer to EC-825, "TURBOCHARGER BOOST CONTROL : Vacuum Hose Drawing". 9. Remove radiator upper hose. Refer to CO-66, "Exploded View". 10. Remove radiator fan and shroud assembly. 11. Remove radiator fan reverse screw.12. Remove fan motor from fan shroud.

INSTALLATION
Install in the reverse order of removal.
Was this page helpful?