Engine Cooling System K9K
Radiator
In this manual: Engine Cooling System K9K
~1min read
Exploded View

1. Reservoir tank cap 2. Reservoir tank
3. Clamp
4. Reservoir tank hose
5. Mounting rubber (upper) 6. Reservoir tank hose
7. Radiator
8. Mounting rubber (lower) 9. Drain plug
10. O-ring
11. Cooling fan assembly 12. Radiator hose (upper) 13. Radiator hose (lower)
A. To water outlet
B. To water inlet
: N·m (kg-m, in-lb)
Removal and Installation
WARNING:Never remove the reservoir tank cap when the engine is hot. Serious burns could occur from high pressure coolant escaping from the radiator. Wrap a thick cloth around the cap. Slowly turn it a quarter turn to allow built-up pressure to escape. Carefully remove the cap by turning it all the way.
REMOVAL
1. Drain engine coolant. Refer to CO-62, "Draining".
CAUTION:Perform when engine is cold
.
2. Remove cooling fan shroud assembly. Refer to CO-68, "Exploded View".
CAUTION:Be careful not to damage or scratch the radiator core.
3. Remove the following parts.
• Front grille assembly: Refer to EXT-18, "Exploded View". • Front bumper: Refer to EXT-12, "Exploded View".• Front combination lamp assembly (RH and LH): Refer to EXL-91, "Exploded View".
4. Remove radiator core support (upper). 5. Remove condenser fixing bolts upper.6. Pull up and remove the radiator assembly (1).
2 : Condenser assembly
: Vehicle front
CAUTION:
Be careful not to damage radiator core and condenser assembly core.

INSTALLATION
• Reinstall any parts removed in reverse order of removal.• Check for engine coolant leaks. Refer to CO-59, "Inspection".
Was this page helpful?