Door & Lock type 2
Door lock operation warning does not operate
In this manual: Door & Lock type 2
~1min read
Diagnosis Procedure 1.CHECK DOOR LOCK FUNCTION
Check door lock function.
Does door lock/unlock using door request switch? YES >> GO TO 2.
NO >> Refer to DLK-256, "Component Function Check".
2.CHECK INTELLIGENT KEY WARNING BUZZERCheck Intelligent Key warning buzzer.
Refer to DLK-263, "Component Function Check".
Is the inspection result normal? YES >> GO TO 3.
NO >> Repair or replace the malfunctioning parts.
3.REPLACE BCM 1. Replace BCM. Refer to BCS-93, "Removal and Installation".2. Confirm the operation after replacement.
Is the result normal? YES >> INSPECTION END
NO >> Check intermittent incident. Refer to GI-42, "Intermittent Incident".
Was this page helpful?