Ignition position warning function does not operate
Check that DTC is not detected with BCM.
Is the inspection result normal? YES >> GO TO 2.
NO >> Refer to BCS-67, "DTC Index".
2.CHECK POWER DOOR LOCK OPERATIONCheck power door lock operation.
Does door lock/unlock with driver side door lock knob and door key cylinder? YES >> GO TO 3.
NO >> Refer to DLK-276, "ALL DOOR : Diagnosis Procedure".
3.CHECK DOOR SWITCHCheck door switch.
Refer to DLK-258, "Component Function Check".
Is the inspection result normal? YES >> GO TO 4.
NO >> Repair or replace the malfunctioning parts.
4.CHECK UNLOCK SENSORCheck unlock sensor.
Refer to DLK-270, "Component Function Check".
Is the inspection result normal? YES >> GO TO 5.
NO >> Repair or replace the malfunctioning parts.
5.REPLACE BCM 1. Replace BCM. Refer to BCS-93, "Removal and Installation".2. Confirm the operation after replacement.
Is the result normal? YES >> INSPECTION END
NO >> Check intermittent incident. Refer to GI-42, "Intermittent Incident".