Key reminder function does not operate
Check that DTC is not detected with BCM.
Is the inspection result normal? YES >> GO TO 2.
NO >> Refer to BCS-67, "DTC Index".
2.CHECK “ANTI KEY LOCK IN FUNCTI” SETTING IN “WORK SUPPORT” 1. Select “INTELLIGENT KEY” of “BCM” using CONSULT-III. 2. Select “ANTI KEY LOCK IN FUNCTI” in “WORK SUPPORT” mode.3. Check “ANTI KEY LOCK IN FUNCTI” in “WORK SUPPORT”.
Refer to DLK-219, "INTELLIGENT KEY : CONSULT-III Function (BCM - INTELLIGENT KEY) (Without Super Lock)".
Is the inspection result normal? YES >> GO TO 3.
NO >> Set “ANTI KEY LOCK IN FUNCTI” in “WORK SUPPORT”.
3.CHECK DOOR SWITCHCheck door switch.
Refer to DLK-258, "Component Function Check".
Is the inspection result normal? YES >> GO TO 4.
NO >> Repair or replace the malfunctioning parts.
4.CHECK INSIDE KEY ANTENNACheck inside key antenna.
• Instrument center: Refer to DLK-230, "DTC Logic". • Console: Refer to DLK-232, "DTC Logic".• Luggage room: Refer to DLK-234, "DTC Logic".
Is the inspection result normal? YES >> GO TO 5.
NO >> Repair or replace the malfunctioning parts.
5.CHECK UNLOCK SENSORCheck unlock sensor.
Refer to DLK-270, "Component Function Check".
Is the inspection result normal? YES >> GO TO 6.
NO >> Repair or replace the malfunctioning parts.
6.REPLACE BCM 1. Replace BCM. Refer to BCS-93, "Removal and Installation".2. Confirm the operation after replacement.
Is the result normal? YES >> INSPECTION END
NO >> Check intermittent incident. Refer to GI-42, "Intermittent Incident".