Brake Control System with ESP

ESP off switch

In this manual: Brake Control System with ESP
Foreword — 1General information — 45Engine Mechanical MR16DDT — 61Engine Mechanical HR16DE — 52Engine Mechanical K9K — 46Engine Lubrication System MR16DDT — 18Engine Lubrication System HR16DE — 14Engine Lubrication System K9K — 11Engine Cooling System MR16DDT — 28Engine Cooling System HR16DE — 29Engine Cooling System K9K — 24Engine Control System MR16DDT — 163Engine Control System HR16DE — 115Engine Control System K9K — 129Fuel System MR16DDT — 13Fuel system HR16DE — 11Fuel system K9K — 12Exhaust system MR16DDT — 7Exhaust system HR16DE — 10Exhaust system K9K — 7Starting system — 24Accelerator control system — 6Clutch — 25Driveline transfer: TY21B — 77Driveline rear propeller Shaft: 3Fφ16-ETJ75 — 12Driveline rear final drive: RTVS — 31Transaxle & transmission 5MT: RS5F92R — 31Transaxle & transmission 6MT: RS6F94R — 30Transaxle & transmission CVT: RE0F10B — 93Transaxle & transmissioN CVT: RE0F11A — 103Front Axle MR16DDT — 18Front Axle HR16DE — 17Front Axle K9K — 17Rear Axle 2WD — 6Rear Axle 4WD — 13Front Suspension — 21Rear Suspension 2WD — 13Rear Suspension 4WD — 17Road Wheels & Tires — 6Brake System LHD — 24Brake System RHD — 24Parking Brake System — 8Brake Control System without ESP — 44Brake Control System with ESP — 63Steering System — 14Steering Control System — 27Seat Belt — 8SRS Airbag — 24SRS Airbag Control System — 93Ventilation System — 11Heater & Air Conditioning System HR16DE — 28Heater & Air Conditioning System MR16DDT — 28Heater & Air Conditioning Control System Type 1 — 49Heater & Air Conditioning Control System Type 2 — 51Heater & Air Conditioning Control System Type 3 — 32Heater & Air Conditioning Control System Type 4 — 40Heater & Air Conditioning Control System Type 5 — 21Interior — 16Instrument Panel — 10Seat — 18Door & Lock Type 1 — 83Door & Lock type 2 — 80Door & Lock type 3 — 65Door & Lock type 4 — 60Security Control System with intelligent key system — 82Security Control System without intelligent key system — 41Glass & Window System — 15Power Window Control System — 28Body Repair — 13Exterior — 20Mirrors — 26Exterior Lighting System Halogen type — 51Interior Lighting System — 24Wiper & Washer — 45Defogger — 31Horn — 4Power Outlet — 4Body Control System With intelligent key system — 21Body Control System Without intelligent key system — 23LAN system can fundamental — 6LAN system can — 31LAN System can system (type 1) — 1LAN System can system (type 2) — 1LAN System can system (type 3) — 1LAN System can system (type 4) — 1LAN System can system (type 5) — 1LAN System can system (type 6) — 1LAN System can system (type 7) — 2LAN System can system (type 8) — 1LAN System can system (type 9) — 1LAN System can system (type 10) — 1LAN System can system (type 11) — 1Power Control System IPDM E/R (with I-key) — 14Power Control System IPDM E/R (without I-key) — 14Power Control System Power distribution system — 25Charging System — 22Power Supply, Ground & Circuit Elements — 20Meter, Warning Lamp & Indicator — 33Warning Chime System — 22Audio, Visual & Navigation System Audio without navigation — 30Audio, Visual & Navigation System Audio with navigation — 33Audio, Visual & Navigation System NISSAN dynamic control system — 22Cruise Control System — 1Drive Mode System — 10Maintenance — 14
~2min read

Component Function Check

1.CHECK ESP OFF SWITCH OPERATION

Check that ESP OFF indicator lamp in combination meter turns ON/OFF when ESP OFF switch is operated.

Is the inspection result normal? YES >> INSPECTION END

NO >> Proceed to diagnosis procedure. Refer to BRC-210, "Diagnosis Procedure".

Diagnosis Procedure

1.CHECK ESP OFF SWITCH CIRCUIT 1. Turn the ignition switch OFF. 2. Disconnect ABS actuator and electric unit (control unit) harness connector. 3. Disconnect ESP OFF switch harness connector.

4. Check continuity between ABS actuator and electric unit (control unit) harness connector and ESP OFF switch harness connector.

5. Check continuity between ABS actuator and electric unit (control unit)

5. Check continuity between ABS actuator and electric unit (control unit) harness connector and ground.

Is the inspection result normal?

Is the inspection result normal? YES >> GO TO 2.

NO >> Repair or replace error-detected parts.

2.CHECK ESP OFF SWITCH GROUND CIRCUIT

Check continuity between ESP OFF switch harness connector and ground.

Is the inspection result normal?

Is the inspection result normal? YES >> GO TO 3.

NO >> Repair or replace error-detected parts.

3.CHECK ESP OFF SWITCH

Check ESP OFF switch. Refer to BRC-211, "Component Inspection".

Is the inspection result normal? YES >> GO TO 4.

NO >> Replace ESP OFF switch. Refer to BRC-237, "Removal and Installation".

4.CHECK ESP OFF SWITCH SIGNAL

1. Connect ABS actuator and electric unit (control unit) harness connector.With CONSULT-III.


1. Connect ABS actuator and electric unit (control unit) harness connector. 2. Connect ESP OFF switch harness connector.

3. Select “ABS”, “DATA MONITOR” and “OFF SW” according to this order. Check ESP OFF switch signal.

Is the inspection result normal?

Is the inspection result normal? YES >> INSPECTION END

NO >> GO TO 5.

5.CHECK TERMINAL • Check ABS actuator and electric unit (control unit) pin terminals for damage or loose connection with harness connector.

• Check ESP OFF switch pin terminals for damage or loose connection with harness connector.

Is the inspection result normal? YES >> Replace ABS actuator and electric unit (control unit). Refer to BRC-233, "Removal and Installation".

NO >> Repair or replace error-detected parts.

Component Inspection

1.CHECK ESP OFF SWITCH 1. Turn the ignition switch OFF. 2. Disconnect triple switch harness connector.

3. Check continuity between terminals of ESP OFF switch connector.

Is the inspection result normal?

Is the inspection result normal? YES >> INSPECTION END

NO >> Replace ESP OFF switch. Refer to BRC-237, "Removal and Installation".