Fuel filler lid opener
Exploded View

1. Fuel filler lid opener cable 2. Cable protector
3. Fuel filler lid lock assembly 4. Fuel filler lid assembly 5. Spring
6. Bumper rubber
: Clip
: Do not reuse
Fuel filler lid
FUEL FILLER LID : Removal and InstallationREMOVAL
1. Fully open fuel filler lid.2. Remove fuel mounting pin (1).

3. Remove mounting screws, and then remove fuel filler lid.
INSTALLATION
Note the following items, and install in the reverse order of removal.
CAUTION:• After installation, check fuel filler lid assembly open/close, lock/unlock operation.
• After installation, apply the touch-up paint (the body color) onto the head of the mounting screws.
NOTE:
• The following table shows the specifide values for checking nomal installation status.• Fitting adjustment cannot be perfomed.

Fuel filler opener cable
FUEL FILLER OPENER CABLE : Removal and InstallationREMOVAL
1. Remove hood lock control cable assembly from instrument lower panel (LH). Refer to DLK-336, "HOOD LOCK CONTROL CABLE : Removal and Installation".2. Remove fuel filler lid opener cable (2) from fuel filler lid opener lever (1).

3. Remove front kicking plate inner (LH) and rear kicking plate inner (LH and RH). Refer to INT-19, "KICKING PLATE INNER : Removal and Installation". 4. Remove dash side finisher (LH). Refer to INT-20, "DASH SIDE FINISHER : Removal and Installation". 5. Remove center pillar lower garnish (LH). Refer to INT-20, "CENTER PILLAR LOWER GARNISH : Removal and Installation". 6. Remove luggage side lower finisher (RH). Refer to INT-31, "LUGGAGE SIDE LOWER FINISHER : Removal and Installation". 7. Remove fuel filler lid opener cable from fuel filler lid lock assembly. Refer to DLK-349, "FUEL FILLER LID LOCK : Removal and Installation".
8. Disengage each harness protector (1), and then remove fuel filler lid opener cable (2

9. Remove fuel filler lid opener cable fixing clips, and then remove fuel filler lid opener cable.
INSTALLATION
Note the following item, and install in the reverse order of removal.
CAUTION:After installation, check fuel filler lid assembly open/close, lock/unlock operation.
Fuel filler lid lock
FUEL FILLER LID LOCK : Removal and InstallationREMOVAL
1. Fully open fuel filler lid. 2. Remove luggage side lower finisher (RH). Refer to INT-31, "LUGGAGE SIDE LOWER FINISHER : Removal and Installation".3. Rotate and disengage fuel filler lid lock assembly, and then remove fuel filler lid lock assembly.
NOTE:
Operation is performed easily when rotating fuel filler lid lock from passenger room side.

4. Disengage fuel filler lid opener cable (1). Remove fuel filler lid opener cable while pressing stopper pin (2).

INSTALLATION
Note the following item, and install in the reverse order of removal.
CAUTION:After installation, check fuel filler lid assembly open/close, lock/unlock operati
on.