Door & Lock type 2

Radiator core support

In this manual: Door & Lock type 2
Foreword — 1General information — 45Engine Mechanical MR16DDT — 61Engine Mechanical HR16DE — 52Engine Mechanical K9K — 46Engine Lubrication System MR16DDT — 18Engine Lubrication System HR16DE — 14Engine Lubrication System K9K — 11Engine Cooling System MR16DDT — 28Engine Cooling System HR16DE — 29Engine Cooling System K9K — 24Engine Control System MR16DDT — 163Engine Control System HR16DE — 115Engine Control System K9K — 129Fuel System MR16DDT — 13Fuel system HR16DE — 11Fuel system K9K — 12Exhaust system MR16DDT — 7Exhaust system HR16DE — 10Exhaust system K9K — 7Starting system — 24Accelerator control system — 6Clutch — 25Driveline transfer: TY21B — 77Driveline rear propeller Shaft: 3Fφ16-ETJ75 — 12Driveline rear final drive: RTVS — 31Transaxle & transmission 5MT: RS5F92R — 31Transaxle & transmission 6MT: RS6F94R — 30Transaxle & transmission CVT: RE0F10B — 93Transaxle & transmissioN CVT: RE0F11A — 103Front Axle MR16DDT — 18Front Axle HR16DE — 17Front Axle K9K — 17Rear Axle 2WD — 6Rear Axle 4WD — 13Front Suspension — 21Rear Suspension 2WD — 13Rear Suspension 4WD — 17Road Wheels & Tires — 6Brake System LHD — 24Brake System RHD — 24Parking Brake System — 8Brake Control System without ESP — 44Brake Control System with ESP — 63Steering System — 14Steering Control System — 27Seat Belt — 8SRS Airbag — 24SRS Airbag Control System — 93Ventilation System — 11Heater & Air Conditioning System HR16DE — 28Heater & Air Conditioning System MR16DDT — 28Heater & Air Conditioning Control System Type 1 — 49Heater & Air Conditioning Control System Type 2 — 51Heater & Air Conditioning Control System Type 3 — 32Heater & Air Conditioning Control System Type 4 — 40Heater & Air Conditioning Control System Type 5 — 21Interior — 16Instrument Panel — 10Seat — 18Door & Lock Type 1 — 83Door & Lock type 2 — 80Door & Lock type 3 — 65Door & Lock type 4 — 60Security Control System with intelligent key system — 82Security Control System without intelligent key system — 41Glass & Window System — 15Power Window Control System — 28Body Repair — 13Exterior — 20Mirrors — 26Exterior Lighting System Halogen type — 51Interior Lighting System — 24Wiper & Washer — 45Defogger — 31Horn — 4Power Outlet — 4Body Control System With intelligent key system — 21Body Control System Without intelligent key system — 23LAN system can fundamental — 6LAN system can — 31LAN System can system (type 1) — 1LAN System can system (type 2) — 1LAN System can system (type 3) — 1LAN System can system (type 4) — 1LAN System can system (type 5) — 1LAN System can system (type 6) — 1LAN System can system (type 7) — 2LAN System can system (type 8) — 1LAN System can system (type 9) — 1LAN System can system (type 10) — 1LAN System can system (type 11) — 1Power Control System IPDM E/R (with I-key) — 14Power Control System IPDM E/R (without I-key) — 14Power Control System Power distribution system — 25Charging System — 22Power Supply, Ground & Circuit Elements — 20Meter, Warning Lamp & Indicator — 33Warning Chime System — 22Audio, Visual & Navigation System Audio without navigation — 30Audio, Visual & Navigation System Audio with navigation — 33Audio, Visual & Navigation System NISSAN dynamic control system — 22Cruise Control System — 1Drive Mode System — 10Maintenance — 14
~3min read

HR16DE

HR16DE : Exploded View
1. Radiator core support upper

1. Radiator core support upper 2. Air guide RH (MT models) 3. Radiator core support lower 4. Air guide LH 5. Air guide (upper) 6. Air guide LH (CVT models) 7. Air guide RH (CVT models)

HR16DE : Removal and Installation: N·m (kg-m, ft-lb)


HR16DE : Removal and Installation

RADIATOR CORE SUPPORT UPPER

Removal
1. Remove front bumper fascia. Refer to EXT-13, "Removal and Installation". 2. Remove front combination lamp (LH and RH). Refer to EXL-91, "Removal and Installation". 3. Remove headlamp (LH and RH). Refer to EXL-89, "Removal and Installation".

4. Disconnect crash zone sensor harness connector. Refer to SR-26, "Removal and Installation".

CAUTION:
Turn ignition switch OFF, disconnect battery negative terminal and then wait for at least 3 minutes.
5. Remove hood lock and hood lock cable fixing clip. Refer to DLK-335, "HOOD LOCK : Removal and Installation". 6. Remove horn bracket. Refer to HRN-4, "Removal and Installation". 7. Remove air guide (upper) fixing clips, and then remove air guide (upper).

8. Remove upper fixing clips (2) of air guide (LH and RH) (1).

9. Remove hood support rod. Refer to DLK-309, "HOOD SUPPORT ROD : Removal and

9. Remove hood support rod. Refer to DLK-309, "HOOD SUPPORT ROD : Removal and Installation".

10. Remove mounting bolts, and then remove radiator core support upper.

Installation Install in the reverse order of removal.

RADIATOR CORE SUPPORT LOWER Removal
1. Remove front bumper fascia. Refer to EXT-13, "Removal and Installation".

2. Remove lower fixing clips (2) of radiator side seal (LH and RH) (1).

3. Use belts (A) to suspend radiator and condenser to prevent

3. Use belts (A) to suspend radiator and condenser to prevent them from falling.

CAUTION:
Never damage radiator and condenser

.

4. Remove mounting bolts, and then remove radiator core support lower.

4. Remove mounting bolts, and then remove radiator core support lower.

Installation
Install in the reverse order of removal.

MR16DDT

MR16DDT : Exploded View
1. Radiator core support upper

1. Radiator core support upper 2. Air guide RH
3. Radiator core support lower 4. Air guide LH

A : 2WD models
B : 4WD models

MR16DDT : Removal and Installation: N·m (kg-m, ft-lb)


MR16DDT : Removal and Installation

RADIATOR CORE SUPPORT UPPER

Removal
1. Remove front bumper fascia. Refer to EXT-13, "Removal and Installation". 2. Remove front combination lamp (LH and RH). Refer to EXL-91, "Removal and Installation". 3. Remove headlamp (LH and RH). Refer to EXL-89, "Removal and Installation".

4. Disconnect crash zone sensor harness connector. Refer to SR-26, "Removal and Installation".

CAUTION:
Turn ignition switch OFF, disconnect battery negative terminal and then wait for at least 3 minutes.
5. Remove hood lock and hood lock cable fixing clip. Refer to DLK-335, "HOOD LOCK : Removal and Installation". 6. Remove horn bracket. Refer to HRN-4, "Removal and Installation".

7. Remove upper fixing clips (2) of air guide (LH and RH) (1).

8. Remove hood support rod. Refer to DLK-309, "HOOD SUPPORT ROD : Removal and

8. Remove hood support rod. Refer to DLK-309, "HOOD SUPPORT ROD : Removal and Installation".

9. Remove mounting bolts, and then remove radiator core support upper.

Installation Install in the reverse order of removal.

RADIATOR CORE SUPPORT LOWER

Removal
1. Remove front bumper fascia. Refer to EXT-13, "Removal and Installation".

2. Remove lower fixing clips (2) of radiator side seal (LH and RH) (1).

3. Using strings (A), hang inlet hose (1) and inlet hose (2) together

3. Using strings (A), hang inlet hose (1) and inlet hose (2) together with charge air cooler.

CAUTION:
Never damage inlet hoses with charge air cooler.
4. Support lower side radiator using wooden blocks (B) and a floor

4. Support lower side radiator using wooden blocks (B) and a floor jack (A).

CAUTION:
Never damage radiator.
5. Remove mounting bolts, and then remove radiator core support lower.

5. Remove mounting bolts, and then remove radiator core support lower.

Installation
Install in the reverse order of removal.