Wiper & Washer
Headlamp washer nozzle and tube
In this manual: Wiper & Washer
~1min read
Exploded View

1. Washer tank
2. Headlamp washer tube (tank side) 3. Headlamp washer tube RH 4. Headlamp washer nozzle connector RH
5. Headlamp washer nozzle bracket RH 6. Headlamp washer nozzle RH 7. Headlamp washer nozzle joint 8. Headlamp washer nozzle bracket LH 9. Headlamp washer nozzle LH 10. Headlamp washer nozzle connector LH
11. Headlamp washer tube LH 12. Check valve
Hydraulic Layout

1. Headlamp washer nozzle tube
: Clip
Removal and Installation
REMOVAL
1. Remove front bumper fascia. Refer to EXT-13, "Removal and Installation". 2. Disengage headlamp washer tube fixing clip from front bumper. 3. Remove headlamp washer nozzle bracket.4. Remove headlamp washer nozzle from the front bumper fascia.
INSTALLATION
Install in the reverse order of removal.
Inspection
CHECK VALVE INSPECTION
Check that air can pass through the hose by blowing forward (toward the nozzle), and check that air cannot pass through by sucking.
Was this page helpful?