Wiper & Washer
Washer pump
In this manual: Wiper & Washer
~1min read
Exploded View

1. Front washer nozzle LH 2. Front washer nozzle RH 3. Front washer tube LH
4. Front washer tube RH 5. Check valve
6. Front washer tube
7. Joint
8. Washer tank inlet cap 9. Washer tank inlet
10. Washer tank
11. Headlamp washer pump 12. Washer pump
13. Packing
14. Rear washer tube
A : Clip
: Clip
: N·m (kg·m, in-lb
Removal and Installation
REMOVAL
1. Remove fender protector RH (front). Refer to EXT-22, "Removal and Installation". 2. Disconnect washer pump connector. 3. Disconnect front washer tube and rear washer tube. 4. Remove washer pump from the washer tank.5. Remove packing from washer tank.
INSTALLATION
Note the following items, and then install in the reverse order of removal.
CAUTION:• Check that there is no leakage after installation or replace packing with new part if it has been damage.
• Never twist the packing when installing the washer pump.
Was this page helpful?