Wiper & Washer
Light & rain sensor
In this manual: Wiper & Washer
~1min read
Exploded View

1. Light & rain sensor bracket 2. Mirror base
3. Light & rain sensor 4. Inside mirror assembly
: Pawl
: Do not reuse
Removal and Installation
CAUTION:When the light & rain sensor is removed from windshield, the light & rain sensor cannot be reused.
REMOVAL
1. Remove inside mirror assembly. Refer to MIR-41, "Removal and Installation". 2. Disconnect light & rain sensor connector.3. Disengage both sides fixing pawls, and remove the light & rain sensor from the windshield.
INSTALLATION
Note the following items, and then install in the reverse order of removal.
CAUTION:• Surface of windshield should be cleaned.
• Never touch gel/adhesive of new part.
Was this page helpful?