U0415 vehicle speed
Description
U0415 is displayed if any unusual condition is present in the reception status of the vehicle speed signal from the ABS actuator and electric unit (control unit).
DTC Logic
DTC DETECTION LOGIC

DTC CONFIRMATION PROCEDURE
1.DTC CONFIRMATION 1. Erase the DTC. 2. Turn ignition switch OFF.3. Perform the “Self Diagnostic Result” of BCM with CONSULT-III, when passed 2 seconds or more after the ignition switch is turned ON.
Is any DTC detected? YES >> Refer to BCS-85, "Diagnosis Procedure".
NO >> INSPECTION END
Diagnosis Procedure
1.ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT) SELF-DIAG RESULTSPerform “Self-Diagnostic Result” of ABS actuator and electric unit (control unit) with CONSULT-III. Refer to BRC-24, "CONSULT-III Function" (without EPS), BRC-131, "CONSULT-III Function" (with EPS).
Is any DTC detected? YES >> Repair or replace the malfunctioning part.
NO >> Replace BCM. Refer to BCS-93, "Removal and Installation".