Engine Cooling System MR16DDT

Water outlet

In this manual: Engine Cooling System MR16DDT
Foreword — 1General information — 45Engine Mechanical MR16DDT — 61Engine Mechanical HR16DE — 52Engine Mechanical K9K — 46Engine Lubrication System MR16DDT — 18Engine Lubrication System HR16DE — 14Engine Lubrication System K9K — 11Engine Cooling System MR16DDT — 28Engine Cooling System HR16DE — 29Engine Cooling System K9K — 24Engine Control System MR16DDT — 163Engine Control System HR16DE — 115Engine Control System K9K — 129Fuel System MR16DDT — 13Fuel system HR16DE — 11Fuel system K9K — 12Exhaust system MR16DDT — 7Exhaust system HR16DE — 10Exhaust system K9K — 7Starting system — 24Accelerator control system — 6Clutch — 25Driveline transfer: TY21B — 77Driveline rear propeller Shaft: 3Fφ16-ETJ75 — 12Driveline rear final drive: RTVS — 31Transaxle & transmission 5MT: RS5F92R — 31Transaxle & transmission 6MT: RS6F94R — 30Transaxle & transmission CVT: RE0F10B — 93Transaxle & transmissioN CVT: RE0F11A — 103Front Axle MR16DDT — 18Front Axle HR16DE — 17Front Axle K9K — 17Rear Axle 2WD — 6Rear Axle 4WD — 13Front Suspension — 21Rear Suspension 2WD — 13Rear Suspension 4WD — 17Road Wheels & Tires — 6Brake System LHD — 24Brake System RHD — 24Parking Brake System — 8Brake Control System without ESP — 44Brake Control System with ESP — 63Steering System — 14Steering Control System — 27Seat Belt — 8SRS Airbag — 24SRS Airbag Control System — 93Ventilation System — 11Heater & Air Conditioning System HR16DE — 28Heater & Air Conditioning System MR16DDT — 28Heater & Air Conditioning Control System Type 1 — 49Heater & Air Conditioning Control System Type 2 — 51Heater & Air Conditioning Control System Type 3 — 32Heater & Air Conditioning Control System Type 4 — 40Heater & Air Conditioning Control System Type 5 — 21Interior — 16Instrument Panel — 10Seat — 18Door & Lock Type 1 — 83Door & Lock type 2 — 80Door & Lock type 3 — 65Door & Lock type 4 — 60Security Control System with intelligent key system — 82Security Control System without intelligent key system — 41Glass & Window System — 15Power Window Control System — 28Body Repair — 13Exterior — 20Mirrors — 26Exterior Lighting System Halogen type — 51Interior Lighting System — 24Wiper & Washer — 45Defogger — 31Horn — 4Power Outlet — 4Body Control System With intelligent key system — 21Body Control System Without intelligent key system — 23LAN system can fundamental — 6LAN system can — 31LAN System can system (type 1) — 1LAN System can system (type 2) — 1LAN System can system (type 3) — 1LAN System can system (type 4) — 1LAN System can system (type 5) — 1LAN System can system (type 6) — 1LAN System can system (type 7) — 2LAN System can system (type 8) — 1LAN System can system (type 9) — 1LAN System can system (type 10) — 1LAN System can system (type 11) — 1Power Control System IPDM E/R (with I-key) — 14Power Control System IPDM E/R (without I-key) — 14Power Control System Power distribution system — 25Charging System — 22Power Supply, Ground & Circuit Elements — 20Meter, Warning Lamp & Indicator — 33Warning Chime System — 22Audio, Visual & Navigation System Audio without navigation — 30Audio, Visual & Navigation System Audio with navigation — 33Audio, Visual & Navigation System NISSAN dynamic control system — 22Cruise Control System — 1Drive Mode System — 10Maintenance — 14
~3min read

Exploded View

1. Heater pipe bracket

1. Heater pipe bracket 2. Radiator cap
3. Water outlet adaptor
4. Clamp
5. Water outlet hose
6. Clamp
7. Heater hose
8. Clamp
9. Water outlet
10. Clamp
11. Heater hose
12. Heater hose
13. Clamp
14. Heater hose
15. Clamp
16. Engine coolant temperature sensor 17. Gasket
18. Rubber ring
19. Water control value 20. Gasket

A. For CVT models Engine front
A. For CVT models
B. To reservoir tank
C. To heater hose
D. To radiator hose (upper) E. To CVT oil warmar
F. To heater hose
G. To heate hose
H. To turbocharger inlet tube

: Always replace after every: N·m (kg-m, ft-lb)
disassembly.: Always replace after every
disassembly.

Removal and Installation

REMOVAL

1. Drain engine coolant from radiator. Refer to CO-11, "Draining".

CAUTION:
• Perform this step when engine is cold.
2. Remove engine cover. Refer to EM-25, "Exploded View". 3. Remove battery. PG-124, "Exploded View". 4. Remove air duct (duct side) and air cleaner cover assembly and air cleaner body assembly. 5. Disconnect radiator hose (upper). Refer to CO-17, "Exploded View". 6. Remove water outlet adaptor. 7. Disconnect connectors of engine harness around the battery. 8. Remove bracket (2), and disconnect engine harness clip.(transmission side and water outlet side) 9. Disconnect crankshaft position sensor harness connector. 10. Move engine (1) harness, and keep a service area. 11. Remove water hose and heater hose. 12. Remove water outlet.

13. Remove engine coolant temperature sensor from water outlet, if necessary.

INSTALLATION

INSTALLATION

Note the following, and install in the reverse order of removal.

Water Control valve
• Install water control valve with making rubber ring (1) groove fit to water control valve flange (A) with the whole circumference.

• Install water control valve (2) with the arrow (A) facing up and the

• Install water control valve (2) with the arrow (A) facing up and the frame center part (B) facing upwards.

1 : Water control valve

Inspection

Inspection

INSPECTION AFTER REMOVAL

Water Control Valve

• Place a thread (A) so that it is caught in the valves of water control valve (1). Immerse fully in a container (B) filled with water. Heat while stirring. • The valve opening temperature is the temperature at which the valve opens and falls from the thread.

• Continue heating. Check the continuous valve lifting toward maximum valve lift.

NOTE

:
The maximum valve lift amount standard temperature for water control valve is the reference value.

• After checking the maximum valve lift amount, lower the water temperature and check the valve closing temperature.

Standard: Refer to CO-29, "Water Control Valve".

Standard: Refer to CO-29, "Water Control Valve".

• If out of the standard, replace water control valve.

INSPECTION AFTER INSTALLATION

• Check for leakage of engine coolant using the radiator cap tester adapter (commercial service tool) and the radiator cap tester (commercial service tool). Refer to CO-11, "Inspection".

• Start and warm up the engine. Check visually that there is no leakage of engine coolant.