B1305 Control Unit Internal Fault
DTC DETECTION LOGIC
| DTC No. | CONSULT screen terms (Trouble diagnosis content) | DTC detection condition | ||
|---|---|---|---|---|
| B1305–04 | Control unit internal error (Audio unit internal fault) |
[—] | Diagnosis condition | When ignition switch is ON. |
| Signal (terminal) | – | |||
| Threshold | Internal fault | |||
| Diagnosis delay time | 30 seconds or more | |||
POSSIBLE CAUSE
Audio unit internal fault
FAIL-SAFE
Audio unit internal error
PERFORM DTC CONFIRMATION PROCEDURE
CONSULT
Ignition switch ON.
Ignition switch OFF and wait at least 30 seconds.
Ignition switch ON and wait at least 30 seconds or more.
Select “Self Diagnostic Result” mode of “MULTI AV”.
Check DTC.
Is DTC B1305–04 detected?
YES>>Refer to DTC Diagnosis Procedure.
NO>>To check malfunction symptom before repair: Refer to Intermittent Incident.
NO>>Confirmation after repair: Inspection End.
PERFORM DTC CONFIRMATION PROCEDURE
CONSULT
Ignition switch ON.
Ignition switch OFF and wait at least 30 seconds.
Ignition switch ON and wait at least 30 seconds or more.
Select “Self Diagnostic Result” mode of “MULTI AV”.
Check DTC.
Is DTC B1305–04 detected?
YES>>Replace audio unit. Refer to Removal and Installation.
NO>>Inspection End.