Driver Controls
Back-Up Lamp System
In this manual: Driver Controls
~1min read
SYSTEM DIAGRAM

Signal transmission function list
| Signal name | Input | Output | Description |
|---|---|---|---|
| Reverse signal | Transmission range switch | TCM | Transmits the reverse signal to the TCM. |
| Reverse signal | TCM | BCM (CAN) | Transmits the reverse signal via CAN communication. |
OUTLINE
Back-up lamp is controlled by back-up lamp control function of TCM.
BACK-UP LAMP OPERATION
TCM detects the CVT shift selector position status from transmission range switch.
TCM sends request signal via CAN communication and turns the back-up lamps on when back-up lamp conditions are satisfied.
Back-up lamp ON condition:
Ignition switch ON
CVT shift selector position R
Was this page helpful?