Driver Controls

Exterior Lamp Battery Saver System

~1min read
System Description

SYSTEM DIAGRAM

Signal transmission function list

Signal nameInputOutputDescription
Combination switch signal Combination switch (lighting and turn signal switch) BCM Transmits the combination switch signal to the BCM.
High beam request signal BCM
  • IPDM E/R (CAN)

  • Combination meter (CAN)

Transmits the high beam request signal via CAN communication.
Low beam request signal BCM IPDM E/R (CAN) Transmits the low beam request signal via CAN communication.

OUTLINE

  • Exterior lamp battery saver system is controlled by each function of BCM and IPDM E/R.

    Control by BCM

    • Combination switch reading function

    • Exterior lamp battery saver function

    Control by IPDM E/R

    • Relay control function

  • BCM turns the exterior lamp OFF*, according to the Nissan Murano vehicle status when ignition switch OFF while exterior lamp is ON, for preventing battery discharge.

*: Headlamp (HI/LO).

EXTERIOR LAMP BATTERY SAVER ACTIVATION

  • BCM activates the timer and turns the exterior lamp OFF 45 seconds after the ignition switch is placed ON→OFF with the exterior lamps ON.

  • When in any of following conditions (after the exterior lamp battery saver is activated), exterior lamps can be turned ON:

    • Ignition switch OFF→ACC/ON

    • Lighting switch is changed