Driver Controls

Daytime Running Light System

~2min read
System Description

SYSTEM DIAGRAM

Signal transmission function list

Signal nameInputOutputDescription
Combination switch signal Combination switch (lighting and turn signal switch) BCM Transmits the combination switch signal to the BCM.
Parking brake switch signal Parking brake switch Combination meter Transmits the parking brake switch signal to the combination meter.
Parking brake switch signal Combination meter BCM (CAN) Transmits the parking brake switch signal via CAN communication.
Daytime running light request signal BCM IPDM E/R (CAN) Transmits the daytime running light request signal via CAN communication.

OUTLINE

  • Turns the front combination lamps on through the LED daytime, parking lamp control module as the daytime running light.

  • Daytime running light is controlled by daytime running light control function and combination switch reading function of BCM, and relay control function of IPDM E/R.

DAYTIME RUNNING LIGHT OPERATION

  • BCM detects the combination switch (lighting and turn signal switch) condition by the combination switch reading function.

  • BCM detects the Nissan Murano vehicle condition according to ignition switch.

  • BCM detects the parking brake condition by the parking brake switch signal received from combination meter via CAN communication.

  • BCM transmits the daytime running light request signal to IPDM E/R via CAN communication according to the daytime running light ON condition.

    Daytime running light ON condition:

    • Ignition switch ON

    • Lighting switch OFF or 1ST

    • Lighting switch AUTO, and the auto light function OFF judgment

    • Parking brake switch OFF

  • IPDM E/R controls the daytime running light relay (ground-side) to turn ON according to the daytime running light request signal.

  • Power is supplied from the daytime running light relay to front combination lamp RH and LH, and then daytime running lamps are illuminated.