Starting and driving

BSW system limitations

~2min read
  • The BSWsystem cannot detect all vehicles under all conditions.
  • The radar sensors may not be able to detect and activate BSWwhen certain objects are present such as:
    • Pedestrian, bicycles, animals.
    • Vehicles such as motorcycles, low height vehicles, or high ground clearance vehicles.
    • Oncoming vehicles.
    • Vehicles remaining in the detection zone when you accelerate from a stop.
    • A vehicle merging into an adjacent lane at a speed approximately the same as your vehicle.
    • A vehicle approaching rapidly from behind.
    • A vehicle which your vehicle overtakes rapidly.
    • A vehicle that passes through the detection zone quickly.
    • When overtaking several vehicles in a row, the vehicles after the first vehicle may not be detected if they are traveling close together.
  • The radar sensor’s detection zone is designed based on a standard lane width. When driving in a wider lane, the radar sensors may not detect vehicles in an adjacent lane. When driving in a narrowlane, the radar sensors may detect vehicles driving two lanes away.
  • The radar sensors are designed to ignore most stationary objects; however, objects such as guardrails, walls, foliage and parked vehicles may occasionally be detected. This is a normal operation condition.
  • The following conditions may reduce the ability of the radar to detect other vehicles:
    • Severe weather
    • Road spray
    • Ice/frost/snow/dirt build-up on the vehicle
  • Do not attach stickers (including transparent material), install accessories or apply additional paint near the radar sensors. These conditions may reduce the ability of the radar to detect other vehicles.
  • Excessive noise (for example, audio system volume, open vehicle window) will interfere with the chime sound, and it may not be heard.