Starting and driving
How to enable/disable the BSW system
In this manual: Starting and driving
5steps
~30min
2/5difficulty
Done 0 of 5

Perform the following steps to enable or disable the BSW system.
Using “Settings” in the vehicle information display:
- Press the
button until “Settings” displays in the vehicle information display and then press the OK button. Use the
button to select “Driver Assistance.” Then press the OK button. - Select “Blind Spot” and press the OK button.
Using the “Driving Aids” screen in the vehicle information display:
- Use the
buttons on the steering wheel to scroll to the Driving Aids screen. - Press the OK button to access the Driver Assistance menu.
- Select “Blind Spot” and press OK to change the Driving Aids setting.
- When enabling/disabling the system, the system will retain current settings even if the engine is restarted.
- The RCTA system (if so equipped) is integrated into the BSW system. There is not a separate selection in the vehicle information display for the RCTA system. When the BSW is disabled, the RCTA system is also disabled.
- When the BSW system is turned on, the BSW/RCTA indicator (white) in the vehicle information display illuminates.
Was this page helpful?