Cruise Control & Driver Assistance

C1a0c Adas Message Counter Failure

3steps
~18min
2/5difficulty
Done 0 of 3
DTC Description

DTC DETECTION LOGIC

DTC No.CONSULT termsDTC detection condition
C1A0C (82, 83) ADAS MSG COUNTER Diagnosis condition When ignition switch is ON.
Signal (terminal) —
Threshold Distance sensor (ICC sensor) detects an error signal via ITS communication from the ADAS control unit.
Diagnosis delay time —

POSSIBLE CAUSE

  • ADAS control unit

FAIL-SAFE

The following systems are canceled:

  • Intelligent Cruise Control

  • Automatic Emergency Braking (AEB)

  • Intelligent Forward Collision Warning (I-FCW)

DTC Confirmation Procedure

PERFORM DTC CONFIRMATION PROCEDURE

CONSULT

  1. Start the engine.

  2. Perform “All DTC Reading” with CONSULT.

  3. Check if either “C1A0C-82” or "C1A0C-83" is detected as the current malfunction in “Self Diagnostic Result” mode of “LASER/RADAR”.

Is “C1A0C-82” or "C1A0C-83" detected as the current malfunction?

YES>>

Refer to Diagnosis Procedure.

NO>>

Inspection End.

Diagnosis Procedure

CHECK DISTANCE SENSOR (ICC SENSOR) SELF DIAGNOSTIC RESULT

CONSULT

Check if “U1000–01” is also detected with “C1A0C-82” or "C1A0C-83" in “Self Diagnostic Result” mode of “LASER/RADAR”.

Is “U1000–01” detected?

YES>>

Perform the CAN communication system inspection. Repair or replace the malfunctioning parts. Refer to DTC Description.

NO>>

GO TO 2.

CHECK ADAS CONTROL UNIT SELF DIAGNOSTIC RESULT

CONSULT

Check if any DTC is detected in “Self Diagnostic Result” mode of “ICC/ADAS”.

Is any DTC detected?

YES>>

Perform diagnosis on the detected DTC and repair or replace the malfunctioning parts. Refer to DTC Index.

NO>>

Replace the distance sensor (ICC sensor). Refer to Removal and Installation.