Cruise Control & Driver Assistance

C1a12 Laser Beam Off Center

5steps
~30min
2/5difficulty
Done 0 of 5
DTC Description

DTC DETECTION LOGIC

DTC No.CONSULT screen termsDTC detection condition
C1A12–78 LASER BEAM OFFCNTR Diagnosis condition When Ignition switch is ON.
Signal (terminal) —
Threshold Radar of distance sensor (ICC sensor) is off the aiming point.
Diagnosis delay time —

POSSIBLE CAUSE

  • Distance sensor (ICC sensor)

FAIL SAFE

  • Intelligent Cruise Control is cancelled.

Diagnosis Procedure

PERFORM DISTANCE SENSOR (ICC SENSOR) SELF DIAGNOSTIC RESULT

CONSULT

  1. Perform “All DTC Reading”.

  2. Check if the “C1A12–78” is detected as the current malfunction in “Self Diagnostic Result” mode of “LASER/RADAR”.

Is “C1A12–78” detected?

YES>>

Refer to DTC Description.

NO>>

GO TO 2.

VISUAL INSPECTION

  1. Check distance sensor (ICC sensor) and distance sensor (ICC sensor) bracket for damage or looseness.

Does damage or looseness exist?

YES>>
  1. Repair or replace affected components. Refer to Removal and Installation.

  2. Perform distance sensor (ICC sensor) alignment. Refer to Work Procedure.

  3. Perform action test. Refer to Description.

NO>>

GO TO 3.

PERFORM ADAS CONTROL SELF DIAGNOSTIC RESULT 1

CONSULT

Check if the “C1A12–78” is detected as the current malfunction in “Self Diagnostic Result” mode of “ICC/ADAS”.

Is “C1A12–78” detected?

YES>>

Replace distance sensor (ICC sensor). Refer to Removal and Installation.

NO>>

Inspection End