Cruise Control & Driver Assistance

C1a18 Radar Aiming Incmp

8steps
~48min
2/5difficulty
Done 0 of 8
DTC Description

DTC DETECTION LOGIC

DTC No.CONSULT screen termsDTC detection condition
C1A18–54 LASER AIMING INCMP Diagnosis condition When Ignition switch is ON.
Signal (terminal) —
Threshold The radar of the distance sensor (ICC sensor) is not adjusted
Diagnosis delay time —

POSSIBLE CAUSE

  • The adjustment of the radar is not yet performed

  • Interruption in radar adjustment

FAIL-SAFE

The following systems are canceled:

  • Intelligent Cruise Control

  • Automatic Emergency Braking (AEB)

  • Intelligent Forward Collision Warning (I-FCW)

DTC Confirmation Procedure

PERFORM DTC CONFIRMATION PROCEDURE

CONSULT

  1. Start the engine.

  2. Turn the MAIN switch of ICC system ON.

  3. Perform “All DTC Reading” with CONSULT.

  4. Check if the “C1A18–54” is detected as the current malfunction in “Self Diagnostic Result” mode of “LASER/RADAR”.

Is “C1A18–54” detected as the current malfunction?

YES>>

Refer to Diagnosis Procedure.

NO>>

Inspection End.

Diagnosis Procedure

ADJUST RADAR ALIGNMENT

CONSULT

  1. Adjust the radar alignment. Refer to Work Procedure.

  2. Erase all “Self Diagnostic Result” with CONSULT.

  3. Perform “All DTC Reading”.

  4. Check if the “C1A18–54” is detected in “Self Diagnostic Result” mode of “LASER/RADAR”.

Is “C1A18–54” detected?

YES>>

Replace the distance sensor (ICC sensor). Refer to Removal and Installation.

NO>>

Inspection End.