Body Exterior, Doors, Roof & Vehicle Security

Door Lock Function

~5min read
System Description

SYSTEM DIAGRAM

Only when pressing the door request switch it is possible to lock and unlock the door by carrying the Intelligent Key.

INPUT SIGNAL AND OUTPUT SIGNAL

Signal nameInputOutputDescription
Key ID signal Remote keyless entry receiver BCM The BCM receives key ID signal inputs and activates the actuators accordingly.
Outside key antenna signal Outside key antenna BCM The BCM receives outside key antenna signals inputs and activates the actuators accordingly.
Inside key antenna signal Inside key antenna BCM The BCM receives inside key antenna signals inputs and activates the actuators accordingly.
Door request switch signal Door request switch BCM The BCM receives door request switch signals inputs and activates the actuators accordingly.
Door switch signal Door switch BCM The BCM receives door switch signals inputs and activates the actuators accordingly.
Push switch signal Push-button ignition switch BCM The BCM receives push switch signal inputs and activates the actuators accordingly.
Turn indicator signal Combination meter BCM (CAN) The BCM receives turn indicator signal inputs and activates the actuators accordingly.

OPERATION DESCRIPTION

  • When the BCM detects that each door request switch is pressed, it activates the outside key antenna and inside key antenna corresponding to the pressed door request switch and transmits the request signal to the Intelligent Key.

  • If the Intelligent Key is within the outside key antenna detection area, it receives the request signal and transmits the key ID signal to the BCM via remote keyless entry receiver.

  • BCM receives the key ID signal and compares it with the registered key ID.

  • BCM locks/unlocks each door (except back door).

  • BCM sounds Intelligent Key warning buzzer (lock: 2 times, unlock: 1 time) and blinks hazard warning lamps (lock: 2 times, unlock: 1 time) at the same time as a reminder.

OPERATION CONDITION

If the following conditions are satisfied, door lock/unlock operation is performed if the door request switch is operated:

Each door request switch operationOperation condition
Lock
  • All doors are closed.

  • Panic alarm is not activated.

  • P (Park) position warning is not activated.

  • Intelligent Key is outside the Nissan Murano vehicle.

  • Intelligent Key is within outside key antenna detection area*.

Unlock
  • Panic alarm is not activated.

  • Intelligent Key is outside the Nissan Murano vehicle.

  • Intelligent Key is within outside key antenna detection area*.

*: Even with a registered Intelligent Key remaining inside the vehicle, door locks can be locked/unlocked from outside the Nissan Murano vehicle with a spare Intelligent Key as long as key IDs are different.

OUTSIDE KEY ANTENNA DETECTION AREA

The outside key antenna detection area of door lock/unlock function is in the range of approximately 80 cm (31.50 in) surrounding the driver and passenger door handles (1) and back door handle (2). However, this operating range depends on the ambient conditions.

SELECTIVE UNLOCK FUNCTION

Lock Operation

When a LOCK signal is sent from door request switch (driver side, passenger side, back door), all doors are locked.

Unlock Operation

  • When an UNLOCK signal from driver side door request switch is transmitted, driver side door is unlocked. When another UNLOCK signal is transmitted within 60 seconds, all other doors (except back door) are unlocked.

  • When an UNLOCK signal from passenger side door request switch is transmitted, passenger side door is unlocked. When another UNLOCK signal is transmitted within 60 seconds, all other doors (except back door) are unlocked.

  • When an UNLOCK signal from back door request switch is transmitted, back door open permission is set. When another UNLOCK signal is transmitted within 60 seconds, all doors (except back door) are unlocked.

How To Change Selective Unlock Operation Mode

CONSULT

Select “LOCK/UNLOCK BY I-KEY” in “Work support” mode of “BCM(INTELLIGENT KEY)”.

Refer to CONSULT Function (BCM - INTELLIGENT KEY).

HAZARD AND BUZZER REMINDER FUNCTION

During lock or unlock operation by each door request switch, the hazard warning lamps blink and Intelligent Key warning buzzer honks as a reminder.

Operating Function of Hazard and Buzzer Reminder

OperationHazard warning lamp blinksIntelligent Key warning buzzer honks
Unlock Once Once
Lock Twice Twice

Hazard and buzzer reminder does not operate in the following conditions:

  • Ignition switch ON.

  • Door is open (only lock operation).

How To Change Hazard And Buzzer Reminder Mode

CONSULT

Select “ANSWER BACK I-KEY LOCK UNLOCK” in “Work support” mode of “BCM(INTELLIGENT KEY)”.

Refer to CONSULT Function (BCM - INTELLIGENT KEY).

AUTO DOOR LOCK FUNCTION

After door is unlocked by door request switch operation and if 60 seconds or more pass without performing the following operation, all doors are automatically locked. However, operation check function does not activate.

Operating condition
  • Door switch is ON (door is open).

  • Door is locked.

  • Push switch is pressed.

How To Change Auto Door Lock Operation Mode

CONSULT

Select “AUTO LOCK SET” in “Work support” mode of “BCM(INTELLIGENT KEY)”.

Refer to CONSULT Function (BCM - INTELLIGENT KEY).

LIST OF OPERATION RELATED PARTS

Parts marked with × are the parts related to operation.

FunctionIntelligent KeyDoor switchDoor request switchDoor lock actuatorInside key antennaOutside key antennaCAN communication systemBCMHazard warning lampIntelligent Key warning buzzerIgnition switch
Door lock/unlock function × × × × × × ×
Hazard reminder function × × × ×
Selective unlock function × × × × × ×
Auto door lock function × × × ×