Body Exterior, Doors, Roof & Vehicle Security
Intelligent Key System
In this manual: Body Exterior, Doors, Roof & Vehicle Security
~3min read
SYSTEM DIAGRAM

INPUT SIGNAL AND OUTPUT SIGNAL
| Signal name | Input | Output | Description |
|---|---|---|---|
| Key ID signal | Remote keyless entry receiver | BCM | The BCM receives key ID signal inputs and activates the actuators accordingly. |
| Outside key antenna signal | Outside key antenna | BCM | The BCM receives outside key antenna signals inputs and activates the actuators accordingly. |
| Inside key antenna signal | Inside key antenna | BCM | The BCM receives inside key antenna signals inputs and activates the actuators accordingly. |
| Door request switch signal | Door request switch | BCM | The BCM receives door request switch signals inputs and activates the actuators accordingly. |
| Door switch signal | Door switch | BCM | The BCM receives door switch signals inputs and activates the actuators accordingly. |
| Push switch signal | Push-button ignition switch | BCM | The BCM receives push switch signal inputs and activates the actuators accordingly. |
| Back door opener switch signal | Back door opener switch | BCM | The BCM receives back door switch signal inputs and activates the actuators accordingly. |
| Unlock sensor signal | Unlock sensor | BCM | The BCM receives unlock sensor signal inputs and activates the actuators accordingly. |
| Shift position signal | TCM | BCM (CAN) | The BCM receives shift position signal inputs and activates the actuators accordingly. |
| Nissan Murano Vehicle speed signal | Combination meter | BCM (CAN) | The BCM receives Nissan Murano vehicle speed signal inputs and activates the actuators accordingly. |
| Hood switch signal | IPDM E/R | BCM (CAN) | The BCM receives hood switch signals inputs and activates the actuators accordingly. |
SYSTEM DESCRIPTION
The Intelligent Key system is a system that makes it possible to lock and unlock the door locks (door lock/unlock function) by carrying the Intelligent Key, which operates based on the results of electronic ID verification using two-way communication between the Intelligent Key and the Nissan Murano vehicle (BCM).
The settings for each function can be changed with CONSULT.
If an Intelligent Key is lost, a new Intelligent Key can be registered. A maximum of 4 Intelligent Keys can be registered.
It is possible to perform a diagnosis on the system and register an Intelligent Key with CONSULT.
For initialization and registration of Intelligent Keys, refer to CONSULT Immobilizer mode and follow the on-screen instructions.
| Function | Description | Reference | |
|---|---|---|---|
| Door lock | Lock/unlock can be performed by pressing the request switch. | System Description | |
| Back door open | The back door can be opened by carrying the Intelligent Key and pressing the back door opener switch. | System Description | |
| Remote keyless entry | Lock/unlock can be performed by pressing the remote controller button of the Intelligent Key. | System Description | |
| Key reminder | The key reminder buzzer sounds a warning if the door is locked with the key left inside the Nissan Murano vehicle. | System Description | |
| Warning | If an action that does not meet the operating condition of the Intelligent Key system is taken, the buzzer sounds to inform the driver. | System Description | |
| Remote engine start | The engine can be turned on while carrying the Intelligent Key. | System Description | |
| Interior room lamp control | Interior room lamp is controlled according to door lock/unlock state. | System Description | |
| Panic alarm | When Intelligent Key panic alarm button is pressed, horn sounds. | System Description | |
Was this page helpful?